ECONOMIC DEVELOPMENT: INDUSTRIAL POWER SERVICE

Rate Schedule IP

Availability

Available through one meter to any customer having a minimum load requirement of 10 megawatts or more and directly fed from the Utility’s 138kv Transmission system. Applicant must be located adjacent to the Utility’s transmission line that is adequate and suitable for supplying the service requested.

Character of Service

Alternating current having a frequency of sixty Hertz and furnished at a voltage which is standard with the Utility in the area served.

Rate*

• Customer Charge – – – – – – – – – -$600.00 per meter per month

• Demand Charge – – – – – – – – – – -$20.72 per KVA of billing demand

• Energy Charge – – – – – – – – – – – -$0.033920 per KWH for all KWH

Minimum Charge

The minimum monthly charge shall be the demand charge.

Determination of Peak Demand and Measurement of Energy

Peak demand shall be measured by suitable recording instruments provided by Utility ad shall be the average number of kilovolt-amperes in the fifteen minute period during which the kilovolt-ampere demand is greater than any other fifteen-minute interval in such month. For those customers who are not being metered by the use of a recording instrument, the peak demand, expressed in kilovolt-amperes, shall be the average number of kilowatts in the recorded fifteen-minute interval in such month during which the energy metered is greater than in any other such fifteen-minute interval in such month, divided by the lagging power factor (expressed as a decimal) calculated for the month. For billing purposes, the billing demand shall be the greater of the peak demand occurring during the month or ten (10) MVA. Energy shall be measured by suitable integrating instruments.

*Subject to the provisions of Appendix A and Appendix B.

Metering Adjustment

If service is metered at a voltage of approximately 13,800 volts or lower, the peak demand and energy measurements shall be increased by two percent (2%) to convert such measurements to the equivalent of metering at the Utility’s primary voltage.

Equipment Adjustment

When customer furnishes and maintains the complete substation equipment, including any and all transformers, and/or switches and/or the equipment necessary to take his entire service at the primary voltage of the transmission of distribution line from which service is to be received, a credit of $0.30 per KVA of billing demand will be applied to each month’s net bill.